12313nkpc cav 20120301-s00006/32112sy no.a2032-1/7 http://onsemi.com semiconductor components industries, llc, 2013 may, 2013 LA4535MC features ? low current drain. ? 16 load drive capability. ? excellent reduced voltage characteristics. ? excellent power supply ripple rejection. ? minimum number of external parts required (no input capacitor, feedback capacitor required). ? less harmonic interference in radio band. ? on-chip power switch function, muting function. specifications absolute maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max quiescent 4.5 v allowable power dissipation pd max 290 mw operating temperature topr ? 20 to + 75 c storage temperature tstg ? 40 to + 125 c operating conditions at ta = 25 c parameter symbol conditions ratings unit recommended supply voltage v cc 1.5 v operating voltage range v cc op 0.9 to 4.0 v recommended load resistance r l 16 to 32 orderin g number : ena2032a monolithic linear ic power amplifier for 1.5v headphone stereo stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended oper ating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty.
LA4535MC no.a2032-2/7 electrical characteristics at ta = 25 c, r l = 16 , rg = 600 , see specified test circuit. parameter symbol conditions ratings unit min typ max quiescent current *1 i cco 1 v cc = 1.2v, quiescent 3.5 6.0 ma i cco 2 v cc = 2.5v, pin 10 gnd 1.5 2.5 ma i cco 3 v cc = 2.5v, pin 1 gnd 1.0 a voltage gain vg1 v cc = 1.2v, f = 1khz, v o = ? 20dbm 20.5 22 23 db vg2 v cc = 0.9v, f = 1khz, v o = ? 20dbm 19.5 22 23 db voltage gain difference vg1 v cc = 1.2v, f = 1khz, v o = ? 20dbm 1.0 db vg2 v cc = 0.9v, f = 1khz, v o = ? 20dbm 1.0 db total harmonic distortion thd v cc = 1.2v, f = 1khz, p o = 0.5mw 0.8 1.5 % output power p o v cc = 1.5v, f = 1khz, thd = 10% 5 8 mw crosstalk ct v cc = 1.2v, f = 100hz, rg = 1k , v o = ? 20db 40 45 db ripple rejection svrr v cc = 1.0v, f = 100hz, rg = 1k , v r = ? 30dbm, bpf = 100hz 45 50 db output noise voltage v no v cc = 2.5v, rg = 1k , bpf= 20hz to 20khz 30 44 v power off effect v o (off) v cc = 0.9v, f = 100hz, pin 1 gnd , v in = ? 10db -80 dbm muting effect v o (mt) v cc = 0.9v, f = 100hz, pin 10 gnd , v in = ? 10db -80 dbm power on current sensitivity l 1 (on) v cc = 0.85v, v5 0.5v 0.1 1.0 a power off voltage sensitivity v 1 (off) v cc = 0.85v, v5 0.1v 0.5 0.65 v muting off current sensitivity l 10 (off) v cc = 0.85v, v5 0.5v 0.3 1.0 a muting on voltage sensitivity v 10 (on) v cc = 0.85v, v5 0.1v 0.5 0.65 v note) the quiescent current is represented by the current flowing into pin 6. the respective maximum currents flowing into pin 1 and pin 10 are calculated by (v pin ? 0.5) / 16 [v/ k ] and the total current increases by these current values. package dimensions unit : mm (typ) 3426 sanyo : soic10 5.0 4.4 6.4 6 10 5 1 0.835 0.15 0.37 0.35 1.0 0.175 1.5 1.75 max
LA4535MC no.a2032-3/7 block diagram test circuit v 10 i 10 v 1 i 1 a 6 1 2 2 2 2 3 4 sg p/sw p/sw mt/sw mt/sw gnd power out 2 out 1 in 1 in 2 pre gnd LA4535MC ref 1 1 1 3 4 5 7 8 1 2 3 dc ripple 4 9 10 v cc i cc v cc rg r l v r r l rg + + + + sample application circuit 6 1 2 off on sg sg p/sw p/sw mt/sw mt/sw gnd power out 2 out 1 in 1 in 2 pre gnd LA4535MC ref 3 4 5 7 8 on off 9 10 v cc v r v r v cc r l r l + + + + + 1 2
LA4535MC no.a2032-4/7 thd -- p o 0.1 2 3 1 5 7 2 3 10 5 7 2 3 5 7 2 4 6 8 10 2 4 6 100 0.1 2 3 5 7 1 2 3 5 7 2 3 5 7 10 100 0.1 23 57 23 57 23 57 23 57 1 1 1.5 2 2.5 3 3.5 1 1.5 2 2.5 3 3.5 23 57 23 57 23 57 23 57 0.1 1 10 23 10 57 2 3 57 2 3 57 2 3 57 1 1 1.5 2 2.5 3 3.5 10 10 10 output power, p o -- mw thd -- p o total harmonic distortion, thd -- % 0.1 supply voltage, v cc -- v p o -- v cc output power, p o -- m w 0 12 0.5 4 supply voltage, v cc -- v p o -- v cc output power, p o -- mw 0 8 0.5 4 output power, p o -- mw total harmonic distortion, thd -- % 2 3 5 7 2 3 5 7 1 0.6 0.8 1 1.2 frequency, fin -- khz thd -- fin total harmonic distortion, thd -- % 0.1 10 0.01 100 supply voltage, v cc -- v thd -- v cc total harmonic distortion, thd -- % 0.4 1.4 0.5 4 50 100 150 20 40 60 80 output power, p o -- m w/ ch pd -- p o power dissipation, pd -- m w 0 200 1100 output power, p o -- m w/ ch i ccop -- p o supply current, i ccop -- ma 0 100 1 100 v c c = 0 . 9 v v c c = 1 . 2 v v c c = 3 v v c c = 1 . 5 v f i n = 1 0 0 h z f in =1 0 k h z f i n= 1 k h z f i n = 1 0 0 h z t h d = 1 0 % t h d = 1 % t h d = 1 0 % t h d = 1 % f i n = 1 0 k h z f i n = 1 k h z v cc =1.2v r l =16 ? p o =0.5mw r l =16 ? fin=1khz r l =16 ? r l =16 ? fin=1khz r l =32 ? fin=1khz v cc =1.2v r l =32 ? p o =0.5mw fin=1khz r l =16 ? v cc =3v fin=1khz r l =16 ?
LA4535MC no.a2032-5/7 vg -- fin 10 15 20 25 25 30 35 30 35 40 30 17.5 20 22.5 25 27.5 0.01 23 57 23 57 1 1.5 2 2.5 3.5 1 23 57 23 57 10 0.1 1 1.5 2 2.5 3 3.5 1 23 57 10 2 3 57 2 3 57 23 57 23 57 23 57 23 57 0.1 1 10 23 10 57 2 3 57 2 3 57 2 3 57 3 1 1.5 2 2.5 3 3.5 10 100 4 supply voltage, v cc -- v vg -- v cc voltage gain, vg -- db 0.5 supply voltage, v cc -- v vno -- v cc output noise voltage, vno -- vrms 20 40 0.5 4 signal source resistance, rg -- k ? vno -- rg output noise voltage, vno -- vrms 25 45 0.1 100 frequency, fin -- khz voltage gain, vg -- db 40 50 40 45 50 frequency, fin -- khz ct -- fin crosstalk, ct -- db 30 60 0.01 100 supply voltage, v cc -- v ct -- v cc crosstalk, ct -- db 35 55 0.5 4 30 40 50 60 2 3 5 7 2 3 5 7 100 capacitance, cref -- f ct -- cref crosstalk, ct -- d b 20 70 1100 capacitance, cref -- f amp on-time -- cref on-time -- msec 10 1000 1100 v cc =1.2v v o =-20dbm r l =16 ? cout=220f v o =-20dbm fin=1khz r l =16 ? cout=220f v cc =1.2v v o =-20dbm rg=1k ? r l =16 ? v cc =1.2v v o =-20dbm f=100hz rg=1k ? r l =16 ? v cc =1.2v r l =16 ? v o =-20dbm fin=100hz rg=1k ? r l =16 ? rg=1k ? r l =16 ? v cc =2.5v r l =16 ?
LA4535MC no.a2032-6/7 svr r -- cref 30 40 50 60 40 45 50 55 60 -- 100 -- 95 -- 90 70 35 40 45 50 55 60 65 1 23 57 23 57 2357 10 1 1.5 2 2.5 3 3.5 0.1 23 57 1 23 57 10 23 57 23 57 1 1.5 2 2.5 3 3.5 1 1.5 2 2.5 3 3.5 0.1 23 57 1 23 57 23 57 10 11.5 0.5 2 2.5 3 4 3.5 100 100 frequency, f -- khz svr r -- f svrr -- db 0.01 supply voltage, v cc -- v svrr -- v cc svrr -- db 35 65 0.5 4 frequency, fin -- khz vmt -- fin mutting level, vmt -- dbm -- 105 -- 85 0.01 100 capacitance, cref -- f svrr -- db -- 100 -- 95 -- 90 1 2 3 4 5 6 7 8 supply voltage, v cc -- v vmt -- v cc mutting level, vmt -- db m -- 105 -- 85 0.5 4 supply voltage, v cc -- v i cco -- v cc quiescent current drain, i cco -- m a 0 9 04.5 0.2 0.4 0.6 0.8 supply voltage, v cc -- v pin voltage -- v cc pin voltage -- v 0 1 0.5 4 v cc =1.0v v r =-30dbm rg=1k ? r l =16 ? v r =-30dbm f=100hz rg=1k ? r l =16 ? vin=-10dbm fin=100hz r l =16 ? v1=0.85v v10=0.3v v1=0.85v v10=0.85v r e f ( 5 p i n ) o u t ( 7 p i n , 9 p i n ) v1=0.85v no load no signal v cc =0.9v vin=-10dbm r l =16 ? v1=0.85v v10=0.3v same characteristics during power-off mode same characteristics during power-off mode m u t e o f f m u t e o n v cc =1.0v v r =-30dbm f=100hz rg=1k ? r l =16 ?
LA4535MC ps no.a2032-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc mak es no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability ar ising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequentia l or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s techn ical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorize d for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other appli cation in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of persona l injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture o fthe part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
